RDM-Builder is a project aimed at simplifying the process of building and managing RDM (Remote Device Management) firmware for ESP32 devices. It provides a set of tools and scripts to automate the compilation and flashing of RDM firmware, making it easier for users to work with RDM-enabled ESP32 devices.

Pros

• Streamlines the RDM firmware building process for ESP32 devices
• Includes pre-configured build environments for different ESP32 variants
• Offers automated scripts for compiling and flashing firmware
• Provides a user-friendly interface for managing RDM configurations

Cons

• Limited documentation, which may make it challenging for new users
• Primarily focused on ESP32 devices, limiting its applicability to other platforms
• Requires some technical knowledge of RDM and ESP32 development
• May have dependencies on specific versions of tools and libraries

Code Examples

# Clone the repository
git clone https://github.com/FuckDoctors/rdm-builder.git
cd rdm-builder

# Build firmware for ESP32
./build.sh esp32

# Flash firmware to ESP32
./flash.sh esp32 /dev/ttyUSB0

This example demonstrates how to clone the repository, build firmware for an ESP32 device, and flash it to the device.

# Example configuration in config.yaml
device:
  name: MyESP32Device
  type: esp32

firmware:
  version: 1.0.0
  features:
    - dmx
    - rdm
    - wifi

build:
  toolchain: xtensa-esp32-elf
  sdk: esp-idf

This YAML configuration example shows how to set up device, firmware, and build options for an ESP32 RDM device.

# Customize build options
./configure.sh --with-wifi --with-bluetooth --enable-debug

# Build and flash in one step
./build_and_flash.sh esp32 /dev/ttyUSB0

This example illustrates how to customize build options and perform a combined build and flash operation.

Getting Started

1. Clone the repository:

   git clone https://github.com/FuckDoctors/rdm-builder.git
   cd rdm-builder
   

2. Install dependencies:

   ./install_dependencies.sh
   

3. Configure your device in config.yaml.

4. Build and flash the firmware:

   ./build_and_flash.sh esp32 /dev/ttyUSB0
   

5. Monitor the device:

   ./monitor.sh /dev/ttyUSB0